Cleaning Products - Grease, Rust Preventative, Bore Cleaner

[jcollins0001]

I have an 82 and a REC7.

What grease do you use ?
What oil rust protectant ?
What bore Cleaner ?

Thanks,

Jeff

[tommygun]

I myself dont use any grease , on my 99 0r 82-A1 , i use break free for lube , or remoil , and use the barret heavy bore cleaner

[m82a1pa]

Ditto on my 82. Grease would serve no purpose. I use oil (Military, Small Arms circa Vietnam because I have a large can of it). Most any oil will suffice - we're not talking about Nascar performance engines here. The Barrett Heavy Bore Cleaner is excellent. Or you can buy Bore-Tech Eliminator - same stuff Barrett repackages - for considerably less. My firearms live in a gun safe so no rust worries. If you do oil the bore, you have to remember to remove most, if not all, before firing. If not, the first round through gives a heck of a bang, Bad juju. When my oil is gone, I'll probably start using Militec. It seems to have good reviews.

[Digrazzz]

What oils do you guys use? I saw remoil? What process to do guys use too? I could understand bore cleaner after each firing but oiling with each use too? Thoughts???

Thanks,
Diggs